TFC型氣體渦輪流量計(以下簡稱流量計)是集流量、壓力、溫度檢測功能為一體，能進行溫度、壓力、壓縮因子自動修正的智能流量計，是我公司吸取國內外流量儀表的先進技術，經優化設計，綜合了氣體力學、流體力學、電磁學等理論而自行研發的高精度、高可靠性的氣體精密儀表，具有優秀的低壓和高壓計量性能，多種信號輸出方式以及對流體擾動低敏感性。該流量計適用于石油、化工、鋼鐵、冶金、輕工、環保及市政建設等行業中的天然氣、煤氣、氮?dú)?、二氧化碳及其它化工氣體介質等流量的測量。

主要參數

產品特點

1.采用微機芯片和軟件技術，賦于儀表強大的智能功能。（對溫度、壓力）具有調零調量程功能，并對壓力、溫度進行自動跟蹤補償，性能*。

Microcomputer chips and software technology are adopted to endow the instrument with powerful intelligent functions. It has the function of zero setting and range adjustment (for temperature and pressure), and automatically tracks and compensates the pressure and temperature, with excellent performance.

2.低流速特性好，對儀表的前后直管段長度要求低（10D，后5D），操作方便，安裝費用低。

This flowmeter has good low flow velocity characteristics, low requirements for the length of the front and rear straight pipe sections of instruments (10D for the front section and 5D for the rear section), convenient operation, and low installation cost.

3.采用微功耗設計技術，既可由一節鋰電池供電運行，又可由外電源供電運行，整機功耗低。

With the micro-power consumption design technology employed, this flowmeter cannot only be powered by a lithium battery but also be powered by an external power supply. The complete machine has a low power consumption.

4.采用機、電、儀一體化設計技術，使流量計集各種信號檢測與處理、流量積算與補償、顯示與通訊于一體。

The integrated design technology of mechanical, electrical, and instrument is adopted to integrate various signal detection and processing, flow integration and compensation, display, and communication.

5.采用進口儀表專用軸承，準確度高，穩定性好，壽命長。

Imported special bearings for instruments are adopted, with high accuracy, good stability, and long service life.